Brooklyn Copper Cookware 3 Quart Sauté—Worth the Wait
See, Figure 1 --It's here!
The BCC Story
A few years ago, what started as an arms-length business transaction with Brooklyn Copper Cookware blossomed into a friendship with its once and future owner, Mac Kohler. This was back when BCC’s production work was done with the help of Hammersmith. For those who don’t know, Hammersmith was heir to the old and well-worn machine tooling used to make the long-defunct Waldow lines of American copperware. From BCC’s founding, Mac has always had the passion and vision to make copper pans—top grade pans—in America again. BCC and Hammersmith succeeded in making very good wares, and developed a loyal following.
What Mac did not have in those days was a means to produce true restaurant- and hotel-grade copper pans, what we collectors and the French cuisiners call “extra fort”. While “fort” at 2-2.5mm in thickness makes for good pans indeed, 2.4mm was the thickest metal the creaky Waldow hand-me-down tooling could handle. Even chefs and cooks who could justify dropping $400 on a single pan sometimes balked at a 2-something-mm sauté when there were 3-something-mm ones to be had. And, some sniffed, what does an American know about making the very best copper pans?
What Mac also didn’t have was dependable production capacity to fill orders for BCC’s pans. This was partly due to the fact that Hammersmith’s work with pans was not their bread and butter—painstakingly making and fitting architectural metal in New York City rail stations was. It was also the case that skilled metalworkers were rare in Brooklyn. So orders lagged, customers started grumbling, and the copper snobs kept sniffing. When Hurricane Sandy, a major gas leak, and a lost lease conspired to halt production completely, BCC and Hammersmith went their separate ways, and it looked like the end.
Passion is a marvelous thing. Mac had it, never lost it. It took him and his new partner, Lane Halley, years, blood, sweat and tears, to resurrect BCC. Mac turned to the heartland to find the materials, tooling, capacity and worker skill sets he would need to make extra fort pans, cast his handles, assemble them, and line their wares with tin. BCC utilized a top casting designer for what are destined to become iconic iron handles. It’s a success story within a success story: Not only are BCC’s pans American-made, they’re produced by metal crafters in America’s rust belt who kept these irreplaceable skills alive like a lost language. And, as you’ll read, while the BCC v2.0 pans are at least the equals of the greatest European makers’, they stand apart as unmistakably American in form.
Fair disclosure: Mac gave me this pan to review.
A Pan by the Numbers
See, Figure 2
At present, the pans BCC offers (sauté, rondeau, casserole, and stockpot) are all 9.5” or 24cm in inside diameter. This number relates to the fact that all can be spun using the same 9.5” diameter lathe tooling. Sautés, unlike frypans, are sized not by diameter but volume; in this case the sauté is truthfully advertized as 3 quarts. However, putting 3 quarts in this pan entails raising a meniscus above the pan’s rim. One quart submerges a rivet, and two quarts would be all the liquid a jittery cook would ever put in it. The floor of the pan is 8.25” or almost 21cm in diameter.
This sauté weighs 6.8 pounds, or roughly 3 kilos. Needless to say, this feels heavy, especially at the end of a handle—few cooks will be able to jump this pan one-handed. Fortunately however, BCC has paired it with both a long (10”/25.5cm) tongue and a loop helper handle. Much more on those in a minute, but for a pan this heavy, it’s been made as jumpable/shakable as possible.
The pan stands 2 11/16” or 6.8cm tall at the walls. This yields a height-to-diameter ratio of 1:2.8, which is a classic proportion for sautés. Its total overall height, from underside to handle top, is only 5.75” or 14.7cm. This makes it easily stowable in short cupboards and shelving. The short handle rise also allows this sauté to hug within 4 inches of a wall when hung from a hook; compare this with over 6” protrusion for most classic sautés.
See, Figure 3 --Note the Protrusion Difference
When hung freely from an overhead rack, the pan only occupies 6” of horizontal space—a saving of 2 inches over my other sautés. However, the long tongue and helper handles together mean that the pan’s overall length is a surprising span of 22 inches.
BCC states that its pans are made from full 1/8” copper foil. It also advertises that its pans are 3mm thick. Since 1/8” is almost 3.2mm, I asked Mac why BCC doesn’t tout the higher 3.2mm number. The answer came back that, while the foil itself is 3.175mm, the turning process moves material on the mandrel, effectively stretching and thinning the walls as the pan is formed up to the rim. My measurements verified that the sauté’s floor is indeed 3.2mm, and that the walls measured between 0.108 and 0.110 inches thick (2.74-2.8mm).
See, Figure 4 -- Wall is 0.015" or 0.3mm thinner than floor
At first glance, I was doubtful the walls were even 2.7mm thick, but the weight told me otherwise. On closer inspection, however, I found that both the inner and outer edges of the rims had been “broken”, or rounded over ever so slightly. This was, I was to discover, just the first of several classy finishing touches BCC gives its pans. Bottom line: Where it matters, this pan is 3.2mm.
See, Figure 5 -- Still thick. Note gentle rounding of edges.
BCC Has it Handled
One thing that sets BCC apart is its unique, robust cast iron handle designs. Mac hired noted designer Barbara Stork to create something distinctive, yet completely functional. What BCC and its customers got were works of elevated art. These designs are so beautiful and detailed, in fact, that BCC chose to cast its mark in the handles rather than stamp it on the pan body (There is a designator mark “S3” stamped on).
The tongue and helper handles on the sauté are unique to this pan (The rondeau, casserole and stockpot each have two different loop handles, and the universal cover also has a different tongue). Classical French sauté handles typically rise almost vertically from the flange and, after a curved section, climb in a straight line at a relatively steep rake of up to 40 degrees; a classic French sauté can have its loop end perched nine inches above the hob. This traditional design is good for leverage and carrying, but the vertical start makes cleaning the pinched space between handle and pan difficult. And a high handle oftentimes means the sauté won’t easily fit in an oven; even if it will, it must usually sit alone on a bottom rack, hogging the whole space. Potatoes go cold while the veal medallions finish…
The BCC tongue handle solves both problems. Its shaft leaves the flange at a much lower angle, and there is a nice ¼” space left built in between the handle’s shaft and the pan wall, both of which eliminate that gunk-trapping crevice on other pans. Also, the BCC tongue itself is a compound curve, which allows it to sit lower overall.
See, Figure 6 -- Note handle's compound curves.
Depending on your oven, this may mean using your oven for more than one dish at a time, or being able to place your sauté on a middle rack. This alone is a big improvement.
See, Figure 7 -- Finally, the pommes can stay in the oven!
The BCC tongue gives up more surprises when you grasp it. For the first 2/3 of its length, it has a pronounced underside rib which makes the pan less “turny” when gripped over- and underhand.
See, Figure 8
And the large hanging eye actually curves up over its final 1.5”. It took me several uses to realize this, but with an overhand grip, the heel of your hand fits comfortably into the little dish formed in the oversized eye; this helps with leverage.
See, Figure 9 –Also a pivot point.
Finally, the symbolic “mark” is on a raised rectangular cartouche, which doubles as a very nice thumb stop/rest when choking up on the handle.
See, Figure 10 -- Alchemy for your kitchen. Note ample cleaning space between wall and handle.
Wiccans reading this may recognize BCC’s mark as a fragment of the alchemical symbol for… copper (I didn’t. I had to ask.).
See, Figure 11 – Your mark of quality and gnosis.
I’ve never seen anything quite like the helper Stork designed for the BCC sauté. I think it looks like a leaf. I was skeptical at first about it, but after use, I think it’s very ergonomic. It is technically a bent loop, with room to accept a very large finger, but it also functions as an “ear” that can be securely grasped with a side towel or mitt. This is brilliant.
See, Figure 12
The tongue handle is secured by 3 large rivets in an inverted classic offset pattern (contrast with Mauviel and Falk’s two).
See, Figure 13 -- Classic pans have the one center rivet above, two flankers below.
As you can see, even the handle flange got special attention. Rather than start with the traditional, boring blob-shaped flange, BCC and Stork imparted a little flair with a gentle point and swoops.
The helper is held fast by two more husky rivets.
See, Figure 14 – No bean-counting engineering here.
All 5 rivets are decidedly stout, with a shaft diameter of 0.315” or just under 8mm. While the rivet heads are smaller than those monsters found on the best vintage European pans (and the Duparquet homages), they are substantially larger than those tiny blips used by Falk, Mauviel, Bourgeat and other modern makers.
See, Figure 15
Finally, the handle castings are perfectly textured where they should be for grip, but smooth where they could bite or scratch.
Tinning, Fit & Finish
The lining arrived very bright, almost mirrored, a finish that I normally associate with electroplated tin.
See, Figure 16
But a glance in good light reveals the sworl marks that come with a hand-wiped lining (more on this in a second).
See, Figure 17 –Machines can’t do this. Ohioans can.
I have no means of measuring the tin thickness, but I’m told this falls between 0.35mm and 0.45mm. Note that this is roughly twice as thick as the stainless linings in bimetal pans. BCC’s linings should last decades with proper utensils and care.
The top surface of the rim was uniformly tinned, no mean feat considering the edges had been broken. I learned that this rounding of the edges is not merely a matter of comfort. It turns out that when sharp corners are tinned, the tin is prone to seize and come off when, e.g., a spoon is rapped on the rim. I’ve personally experienced tinned rims blistering when nowhere else did; this may be why.
The exterior arrived polished brightly, but well short of a mirror finish. In fact, the pattern imparted by the cutting rouge was still visible in good light. Having said that, this is definitely not a brushed finish like Falk’s.
The fitment of rivets and handles is tight, square and flawless. I have never seen better.
Finally, a wonkish word on hardening. This subject would not normally fall under finish but it belongs here for this pan. That is, traditionally, copper pans were worked to shape in stages, originally by hammering the soft metal. Hammering (a/k/a planishing) hardens the copper. This is good in a finished pan, but can be bad if there’s forming yet to be done, because hardened copper can crack when it’s worked. Coppersmiths learned that their work could be resoftened by heating, annealing the metal so it could be further worked to a pan’s final shape without cracking. Pound a little, anneal, pound some more, repeat. After forming, the best pans got a final session of planishing, intended to work harden the copper. Harder pans meant longer-lived, flatter pans, and so the planishing marks became recognizable signs of high quality. Uniform, interlocking patterns became the beautiful, prismatic “painting” on the “canvas” of the copper.
BCC’s pans are obviously not planished, but they are work-hardened. Because they are spun on a lathe and formed in one fell swoop by a craftsman using his hands and ears, they get their hardening all at once, while they’re being made. BCC’s website explains this in deep detail; suffice it to say, stamped copper pans don’t get hardened this way, and the bimetal ones can’t be hardened by planishing—if it weren’t for the thin steel liner, they’d bend, warp and dent like crazy. The BCC craftsmen listen for the sounds the copper makes as they work it, and the art is in fully forming the pan just as the metal rings like a bell. The BCC pans needn’t be planished to be hardened. Ergo, planishing would be purely a cosmetic, expensive finish.
Astute readers of BCC’s website might wonder as I did: If BCC applies linings after preheating its pans to 1200F, why aren’t they annealed back to soft and don’t they lose this work-hardening? The answer turns out to be that only the surface of the metal is brought to that perceived temperature, and much cooler (500F) molten tin is quickly ladled in to moderate the heat. Yet there’s enough stored heat left to keep all the tin flowing and get a good, thick, even wiped coating. This is yet another example of the craft required to make these pans correctly.
BCC’s website describes their pans as: “… merely the best and most beautiful copper cookware in history.” Now, I know Mac to be a temperate man, not prone to puffery, but is this objectively true? Is such a claim of the reasonable-minds-can-differ flavor, or is it pride and hyperbole?
The only way I can judge is to compare this pan with the finest vintage copperware I own or have handled. I do not have another 24cm sauté, but my best extra fort sautés and rondeaux are three made by the famed house of Gaillard, one sauté a 22cm and the other a 28cm, and the rondeau a massive 36cm.
I can objectively state that my Gaillards are thicker, close to 4mm bottoms. I can also say the Gaillards are marginally thicker in the walls, “miking” at between 3.0 and 3.1mm average (compared with this pan’s nominal 2.8mm thickness). Measuring these planished pans’ walls is uncertain to some degree, because the hammer blows push the copper about, making it thinner where the center of the hammer fell and thicker around the edges. Gaillard was also famous for intentionally tapering its walls toward the top—its pans were sometimes well under 3mm at their rims and much more than 3mm in the bottoms. But if greater thickness alone in a sauté equates with best ever, BCC may be fudging a little. However, Gaillard has been out of business for a long time. Other than a handful of tiny boutique ateliers, I don’t think anyone is making copper sauté pans any thicker than BCC’s.
Interestingly, the 24cm BCC saute’s gentle shoulder radius means that the 8.25“/21cm floor is large enough for three of the enormous chicken breasts now dominating the consumer market. In comparison, my 22cm Gaillard, with more acute corners and a slightly smaller floor of 7.875”/19.7cm, would only fit two without crowding. In other words, the BCC pan cooks “bigger” than the 1cm floor size difference would indicate.
I can also say that, poor cook that I am, and sautéing not happening on the walls, I can tell no performance difference between these pans. So any debate about “best” in this lofty class of pan necessarily devolves into a near-theological debate. To keep things real, if BCC’s pan is the thickest one you can buy new, and it ranks 99.7% (compared to 80% for best-in-class clad), and the only arguably “better” pan ranks 99.8%--and is unavailable—why isn’t BCC’s the best?
I have no problem whatsoever judging the BCC sauté as attaining the finest level of fit, finish and ergonomics I’ve ever seen. Nothing else I’ve handled comes close.
On the aesthetic side, the Stork handles are beautiful in ways that a classical pan’s handles have never been. In fairness, no one before lavished such design acumen and attention on functional handles for copper cookware. Simply as a matter of industrial design, these handles are masterpieces; if Alessi copied these handles in stainless steel for some Danish designer’s clad pans, they’d instantly be on display in MOMA.
I confess I prefer the look of planished pans, and I still consider planishing a mark of quality. But I accede that it’s not a necessary condition for attaining work-hardening. There are also some touches on some vintage pans, e.g., stepped chamfering on the bottom/wall radius (barely visible in Figure 3), that I find particularly beautiful.
Finally, the form of BCC’s pans is distinctly American even in ways that transcend those glorious, muscular Stork handles. I find intrinsic beauty in this, even if I can’t fully articulate all the style elements.
The Beauty Marks
This is the hardest part of this review to write. Far be it for me, a spectator and dilettante, to deign to tell BCC what it could do better. There are probably 100 reasons I’m wrong to quibble over minutia, and it’s all just my opinion, but here I go, telling Rembrandt how to paint…
I find the overall length of 22 inches too long to fit on a crowded cooktop. I wish that—for a 24cm sauté—the tongue was shorter, and I may have omitted the helper on this size pan. For comparison, my 22cm Gaillard’s handle adds <7 inches to the pan’s overall length; if it were fitted to the BCC sauté, the OAL would be more like 16 inches overall.
I wish BCC had found a way to employ inner rivet heads that sit flush with the pan wall. I put this in the “nice touch” category rather state it as a problem.
The leverage could be better. Perhaps this is because I’m accustomed to high-rake, traditional handles, or that there's a helper hanging out there, but the 6.8-pound, 24cm BCC pan feels more than 1 pound heavier than the 5.8-pound Gaillard 22cm.
For my large hands, I wish the waist of the tongue handle had been kept a bit fatter—it still feels slightly “turny” like some Mauviel pieces.
See, Figure 18 -- Handle waist viewed from beneath
As long as I’m fantasizing, offering a silver-lined option would be nice. Make it thick Sheffield plate while you’re at it, Rembrandt.
Upper 99th percentile in performance. Flawless fit and finish. Iconic styling. Versatile size. Designed and made in America by really good people. Immortal. Stunningly beautiful. The best pan of any kind available at retail. A value at $400.
This pan will either make you cook better, or care about cooking more—in which case, you’re also likely to cook better. If consumers have any sense at all, BCC v2.0 will be a smashing success.
To Learn More:
Brooklyn Copper Cookware, Ltd.
687 Jay Street
Brooklyn, NY 11201
Aloha, and copyright 2016,
by Brianne Garrett | New year, new me. It’s a popular mantra that we all tell ourselves going into a new year—vowing that...
by Gretchen Lidicker | If you want to eat less sugar, finding no-sugar and low sugar breakfast recipes that are both easy...