Home Cooking

Roasting Beef Beef Chuck Beef Shoulder

Cross Rib/Shoulder Roast...vs....Chuck Roast/Blade Roast Challenge , Roasted Low and Slow @ 210* With Pictures


Home Cooking 88

Cross Rib/Shoulder Roast...vs....Chuck Roast/Blade Roast Challenge , Roasted Low and Slow @ 210* With Pictures

fourunder | Dec 7, 2012 10:38 AM

This past week, the supermarket I frequent most had a sale on beef. Whenever this happens, I always pick up a few Chuck Roasts to have on hand….but this time, I also picked up a Shoulder Roast as well. The sale price for both was only $2.57 per pound…the average price was less than $8 per roast…very reasonable and quite a bargain…especially when you consider I plan to experiment with the beef to see if I will like the final results….or find it was a failure and end up feeding it to my Sister-in-Law’s two dogs…..truth be told, they always get some anyway.

Recently, there has been some interest in finding ways to prepare cuts of beef that I was generally not familiar with, particularly a *Cross Rib Roast*. After doing some research, I have found that this is a cut from the Chuck Section or Shoulder portion of the carcass. The *Cross Rib Roast* is a term more common in the West Coast of the USA…..in Canada it is known as the *Boneless Cross Rib Roast*……..however in many other regions the Alternative Names are : Chuck Shoulder Roast, Boneless Chuck Pot Roast, Arm Pot Roast, Shoulder Clod Roast, English Roll and Shoulder Clod. In my area of New Jersey, it is known simply as a *Shoulder Roast*.

The strange thing about both the Cross Rib Roast and the Chuck Roast…is that they are both believed to be best suited for a braise, as in for a Pot Roast Recipe….but I have found that the Chuck Roast makes for a very nice and flavorful beef roast when dry roasted low and slow to Medium-Rare temperature.. Granted it’s not the most tender option and a few of the muscles are jaw challenging…but with a low and slow roasting, it becomes tender, and for myself, quite enjoyable.

Since the beef was on sale, I thought this would be a good time to find out if the Cross Rib Roast was any good…and how it compared to a Chuck Roast/Blade Roast…roasted low and slow…given the sale price was the same for both.

The preparation and process was simple. I took both cuts of beef and Jaccard Meat Tenderized them. I seasoned both with only Kosher Salt 24 hours in advance of roasting. The following steps details the process:

Seasoned Simply With Kosher Salt For 24 Hours
Removed both roasts from the refrigerator two hours prior to roasting.
Seared both roasts
Both roasts placed atop a grill grate over a sheet pan
Preheated the oven to 450*
Placed the two roasts into the oven and dropped the temperature to 210*
Rotated and Flipped both roasts halfway at 90 minutes.
Pulled the Chuck Roast @ the 3 hour mark, 130 degrees
Pulled the Shoulder/Cross Rib Roast @ 3.5 hours and 135*
Allowed both roasts to rest covered, and or, for 60 minutes @ 140* in the oven
Sliced the beef
You can see the results in the pictures.
Zero bleeding.
Tender Beef

Points to note:

Hands down, the Cross Rib Roast was much more tender than the Chuck Roast…however, the beef flavor was not as pronounced. Given the results, the Shoulder Roast can be a nice alternative, but I still prefer the Chuck Roast, as it offers much more beef flavor. The Cross Rib /Shoulder is more elegant than the Chuck Roast in slicing presentation, but the lack of flavor submits to the little fight and chew the Chuck Roast has for me to prefer it over the Cross Rib Roast in the end. I can see why the Cross Rob/Shoulder is a favorite of many Barbecue enthusiasts. Tender beef with added Smoke flavor.

For the record, I would not braise the Cross Rib Roast Shoulder Roast for pot roast…. The first thing I noticed was how meaty and lean the Cross Rib was compared to the Chuck Roast. I tried a slice of the Chuck first and it was very flavorful but the meat was kind of stringy and had some chew. The Cross Rib Roast was much more tender. The meat is a finer textured than the chuck, In general, I have found whenever roasting beef, the optimal resting time is two hours. Initially, I sliced both beef roasts after a 60 minute resting period. Both roasts were great…..but I gave the overall nod to the Shoulder/Cross Rob Roast for tenderness, The Chuck Roast for flavor. Surprisingly before putting the Cross Rib Roast away…after 2.5 hours covered by a stainless steel bowl. The beef was even more tender and enjoyable. The longer resting period is key for superior results.

My two mandates for roasting any beef:

Roast low and slow

Rest meat for a minimum of two hours

Enjoy the pictures…

Want to stay up to date with this post?

Recommended From Chowhound