Having thought I mastered my new Fagor Duo, I tried to cook 4 pounds of cut-up chicken this morning, with 3 cups of water.
After 8 minutes, steam was coming out of the top handle/valve area. Based on what I learned next time, I just tapped the yellow rod, and it popped up and the steam stopped. After another 3 minutes or so, a large burst of steam came out the pressure release area so I reduced the gas stove to medium.
** I tapped the yellow rod and it was firmly up and locked ***
I lowered the heat further to low and light steam continued coming out of the pressure release area, which led me to think I was at full 15PSI pressure.
However, after a few minutes, the rod dropped so I obviously lost pressure.
I turned it back to high and after a few minutes the rod went up and heavier steam came out the pressure release.
However, this time, I tapped the rod quickly and I could tell it wasn't as firmly under pressure as initially, despite the steam coming out the top.
Here's a video towards the end which depicts the steam coming out but how limp the rod was:
When I was done, I turned the knob to pressure release and barely any steam came out.
1) Basically, it seems like the steam coming out the top is not a reliable indicator that I'm at 15 psi, and
2) The yellow rod seems a bit finicky.
I'm really dissatisfied with the Fagor relative to my old reliable pressure cooker pictured here: https://www.youtube.com/watch?v=LleJ9...
The only reason I purchased a new one was I wanted one that was less noisy, and one that would lose less steam. However, my old one is 10 years old, never required a gasket change, and is very reliable.
Any thoughts on what I could be doing wrong with the Fagor? I'm on the verge of returning it to amazon.
Invite a friend to chime in on this discussion.Email a Friend
Sign up for our newsletter to receive the latest tips, tricks, recipes and more, sent twice a week.